Home/ Materials/ Custom Extruded Sheet
Rowmark

Custom extruded sheet
for formed parts.

Rowmark is best known for engraving stock. They also run a second line entirely — laminated and co-extruded sheet built for thermoformers, vehicle upfitters and sign makers. We are a Rowmark distributor and can supply any of it.

What This Is
01

A different family
from the engraving stock.

Our engraving sheet is two-color material that gets lasered and rotary cut for signs and badges. This is not that. Custom extruded sheet is single-purpose material built to be formed — a decorative or protective face co-extruded or laminated onto a structural core, so the part comes off the mould already finished.

If you are building van interiors, boat dashes, powersports panels, equipment shrouds or backlit signage, this is the line to look at. Thicknesses run 0.005″ to 0.325″, widths to 74″, with custom color matching across the range.

The Nine Lines

Three have full detail pages. The rest we can quote and order in the same way — the data sheets exist, we just have not built pages for them yet. Ask and we will send the sheet.

HI Acrylic
Day/Nite Panel
Color-inverting backlit acrylic. Reads black unlit; diffuses LED light evenly across the face when backlit, with no hot spots and no visible dots. 25% light transmission, up to 64″ wide.
Illuminated signage · channel letters · light diffusers · architectural lighting
Full details →
Co-extruded
Acrylic Capped ABS
Impact-modified acrylic cap fused onto a medium-impact ABS core in one die. The weather resistance of acrylic with the forming and bonding behavior of ABS. High-gloss or low-gloss.
Interior & exterior panels · dashes · consoles · covers · shrouds
Full details →
Laminated
Vinyl/ABS
Vinyl foam composite over ABS. Textured, leather-like and near impervious to scratching, so a formed part looks hand-wrapped without the labour or the seams.
Van & automotive interiors · marine dashboards · RV · ATV components
Full details →
Core material
ABS Sheet Products
The substrate under most of this family, and a material in its own right. Tough, easy to machine and form, solvent cements into structural joints. We stock four thicknesses for indoor work.
Enclosures · interior panels · thermoformed parts · fixtures
Full details →
Ask us
Soft Touch ABS
A smooth, rubber-like surface over an ABS core, with UV stability. Specified where the part is handled constantly and should not feel like hard plastic.
Premium tactile applications · grips · handled panels
Ask us
Felt Laminated ABS
Felt laminated onto ABS for acoustic performance and a decorative finish, on formed components where sound matters as much as looks.
Formed acoustic components · decorative trim
Ask us
Metallic Flake ABS
Decorative metallic shimmer through the sheet rather than sprayed on top, so a formed panel carries the finish without a paint operation.
Golf carts · ATVs · recreational vehicles · marine
Ask us
Rowmark LD
Light-diffusing sheet built to eliminate LED hot spots and amplify light intensity. The companion to Day/Nite where you need diffusion without the color-inverting effect.
LED fixtures · light boxes · backlit panels
Ask us
TPE — Thermoplastic Elastomer
Soft-touch and no-slip surfaces, run as rollstock rather than sheet. Different format from the rest of this list, so tell us the application early.
Soft-touch surfaces · no-slip treads · rollstock applications

Straight answer on availability: we do not stock any of this line today. We stock Rowmark's engraving sheet, and we order the custom extruded materials in per job — which is normal for specified sheet, since gauge, color, grain and finish all get chosen for the part. If you are running something repeatedly, tell us. Steady demand is exactly what puts a material on our floor, and we would rather stock what people actually buy than guess.

Who This Is For
02

Formed parts that have
to look finished.

The common thread across this whole family is that the surface comes out of the die already right. No paint line, no wrapping operation, no vinyl to lift at an edge in year two. You form the part and it is done.

That matters most to people building in the tens and hundreds rather than the tens of thousands — van converters, boat builders, powersports fabricators, equipment manufacturers and sign shops. If you are currently wrapping, painting or laminating a formed panel by hand, this line is worth pricing against your labour.

Common Questions

Is this the same as your engraving material?

No, and it is worth being clear about it because both come from Rowmark. Engraving sheet is two-color stock designed to be lasered or rotary cut so a contrasting layer shows through — signs, badges, plaques, ADA. Custom extruded sheet is single-purpose material built to be thermoformed into finished parts. Different products, different customers, different line at the factory.

Can you get all nine?

Yes. We are a Rowmark distributor and can quote and order anything they run, including custom color matching across the line. Four of these have detail pages on this site; for the rest, call us and we will send the manufacturer data sheet and price the run.

What are the minimums and lead times?

They depend on the product, the gauge and whether you are taking a stock color or a match. Rather than publish a number that is wrong for your job, tell us the material, the size and the quantity and we will come back with the real figure. If you are prototyping, say so — there is usually a way to get a small quantity to prove the part before you commit to a run.

Can you cut and form it, or just supply the sheet?

We cut to size and CNC rout in our Sparks shop, and we can trim formed parts. We do not run a thermoforming line, so the forming itself happens at your shop or your former's — we supply the sheet cut to your blank size and handle the machining around it.

Why should I buy this locally instead of direct?

Two reasons. You get one sheet or a partial order instead of a mill minimum, and you get it cut to blank size so you are not paying to freight offcuts across the country. Free delivery in Reno, Sparks, Carson City, Fernley and USA Parkway.

Rowmark engraving materials →   ·   All industrial plastics →

Get Started

Walk in. Call us.
Or send a message.

Whatever you need — one piece or one hundred, a quick cut or a full fabrication run — we're here. Serving Northern Nevada since 1979.

745 E. Greg St. #6, Sparks, NV 89431
(775) 358-8211 · sales@silverstateplastics.com
4.9
★★★★★
Google Reviews
Reno's Plastic Shop
Call (775) 358-8211 Get a Quote →